Pellet Mill : Cooler
(1)Temperature of cooled pellets wont be +3~+5 degrees higher than room temperature;moisture reduce rate=3.5%.
(2)After stop,cooler discharges pellets automatically to avoid feeds from cross contamination.
(3)Special force discharge frames;flexibly slide,stable run.
(4)Be used to cool down all kinds of pellets;can be matched with
secondary volute separator.
|
Modle |
SKLN1.1×1.1 |
SKLN15×15 |
SKLN19×19 |
SKLN19×24 |
SKLN24×24 |
SKLN24×28 |
|
Copathy(t/h) |
3 |
5 |
10 |
15 |
20 |
25 |
|
Power(kw) |
0.75+0.75 |
0.75+0.75 |
1.5+1.5 |
1.5+1.5 |
2.2+2.2 |
2.2+2.2 |
SLNF Series Tipping Counterflow Cooler
(1)Asway tipping discharge device is controled by flexible hydraulic system.
(2)Adjustable discharge speed;material flows equably and smoothly.
(3)Rotating material sprinkle device to insure material be cooled equably and Drastically;also avoid pellets from break.
(4)Be used in cooling of various materials,such as pellets,extrude feed,sheet feed,powder,etc.
|
Modle |
SKLN15×45 |
SKLN19×19 |
SKLN19×24 |
SKLN24×24 |
SKLN24×28 |
SKLN28×28 |
|
Copathy(t/h) |
5 |
10 |
15 |
20 |
25 |
30 |
|
Power(kw) |
0.75+0.75 |
1.5+1.5 |
1.5+1.5 |
2.2+2.2 |
2.2+2.2 |
2.2+3 |
